Capillary
Flexible capillary line

Applications: A flexible stainless steel armored line assembly, is available for mounting the gauge at some point away from the seal location to provide easy reading or to limit the temperature at the gauge to 100 °C maximum.
Diaphragm seals (isolators) with filled, capillary line assemblies are another good solution to the problem of hot
liquid and gas lines. Due to the small diameter of the flexible line (capillary) a five foot line length will usually assure
that the temperature of the gauge connection does not exceed 100 °C.

Cooling
Cooling element

Metric Range Max: 1000 bar,
Imperial Range Max: 15.000 psi

Applications: The cooling element protects the measuring device if used with hot process media.

Flushing Ring
Accessories for instruments

Standard: DIN / ANSI,
Size: 2 ... 4 \" / DN 50 ... DN 100,
Metric Range Max: PN400,
Imperial Range Max: 2.500 lbs

Applications: Optional calibration rings are available to be used with the Flush diaphragm seals.

Mounting Accessories

Applications: Fixed mounting of valves if direct mounting is not strong enough.

Pipe Connector

Size: d = 20 mm,
Metric Range Max: 250 bar,
Imperial Range Max: 3.600 psi

Applications: Pipe connectors are used to mount a pressure measuring device at the process pipe.

Siphon ASME
Siphon according to ASME

Metric Range Max: 658 bar,
Imperial Range Max: 9.550 psi

Applications: In order to prevent live steam from entering a pressure gauge Bourdon tube, a siphon filled with water should be installed between the gauge and the process line. Also use siphons whenever condensing hot vapors (not just steam) are present.

Siphon DIN
Siphons according to DIN

Standard: DIN 16282,
Metric Range Max: 100 bar,
Imperial Range Max: 1.450 psi

Applications: In order to prevent live steam from entering a pressure gauge Bourdon tube, a siphon filled with water should be installed between the gauge and the process line. Also use siphons whenever condensing hot vapors (not just steam) are present.

Swivel Adapter

Applications: The swiveling connector is used to adjust position of gauge face to operator.

Vent Valve

Applications: Plugs and vents for venting and flushing connections.